Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            AEMC 3930: (1 year) CAL VER /5500
DATE:                  25-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.4 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       13
NUMBER OF LINES:       120
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required
#   Files: None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R                    P                            F        W
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Connect UUT to AC power and turn unit ON.
  1.004  DISP
  1.004  DISP         Warm-up time: 30min - REQUIRED
  1.004  DISP         Temperature: 23 +/-2 degC
  1.004  DISP         Humidity: 55 +/-10%
  1.005  DISP         [32]                WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  DISP         Press the following keys on the AMEC 3930 to
  1.006  DISP         to set up the UUT.
  1.006  DISP
  1.006  DISP         (SHIFT) (CLR)
  1.006  DISP         (U eff) (> >)
  1.006  DISP         (RANGE U) (> >)
  1.006  DISP         (I eff) (> >)
  1.006  DISP         (P) (> >)
  1.007  DISP         Press the DISPL. key until the display reads:
  1.007  DISP
  1.007  DISP         Ueff= 0 V
  1.008  DISP         Connect the 5500A and the UUT as follows:
  1.008  DISP         [32] 5500A NORMAL HI to UUT U* (+) Input
  1.008  DISP         [32] 5500A NORMAL LO to U (-) Input
  1.009  HEAD         {VOLTAGE}
  1.010  DISP         Select the 100 V range by pressing the RANGE U
  1.010  DISP         key until 100V is selected. Press the Ueff key
  1.010  DISP         to select Volts.
  1.010  DISP
  1.011  HEAD         VOLTAGE : {100V Range}
  1.012  5500         100.0V         0.3U          50H            SI       2W
  2.001  5500         10.0V          0.1U          50H            SI       2W
  3.001  DISP         Select the 500 V range by pressing the RANGE U
  3.001  DISP         key until 500V is selected. Press the Ueff key
  3.001  DISP         to select Volts.
  3.001  DISP
  3.002  HEAD         VOLTAGE : {500V Range}
  3.003  5500         500.0V         1.5U          50H            SI       2W
  4.001  5500         50.0V          0.15U         50H            SI       2W
  5.001  HEAD         {CURRENT}
  5.002  DISP         Connect 5500A to the UUT as follows:
  5.002  DISP         [32] 5500A AUX HI to UUT I* (+) Input
  5.002  DISP         [32] 5500A AUX LO to UUT I (-) Input
  5.003  HEAD         CURRENT: {1A Range}
  5.004  DISP         Select the 1A range by pressing the RANGE I
  5.004  DISP         key until 1A is selected. Press the Ieff key
  5.004  DISP         to select Amps.
  5.005  5500         1000mA         4U            60H            SI       2W
  6.001  5500         100mA          1U            60H            SI       2W
  7.001  HEAD         CURRENT: {5A Range}
  7.002  DISP         Select the 5A range by pressing the RANGE I
  7.002  DISP         key until 5A is selected. Press the Ieff key
  7.002  DISP         to select Amps.
  7.003  5500         5.000A         0.02U         60H            SI       2W
  8.001  5500         0.500A         0.002U        60H            SI       2W
  9.001  HEAD         CURRENT: {10A Range}
  9.002  DISP         Select the 10A range by pressing the RANGE I
  9.002  DISP         key until 10A is selected. Press the Ieff key
  9.002  DISP         to select Amps.
  9.003  5500         10.00A         0.04U         60H            SI       2W
 10.001  5500         1.00A          0.01U         60H            SI       2W
 11.001  HEAD         {POWER FACTOR}
 11.002  DISP         Select the 1A range by pressing the RANGE I
 11.002  DISP         key until 1A is selected.  Select the 100V range
 11.002  DISP         by pressing the RANGE U until 100V is selected.
 11.002  DISP
 11.003  DISP         Select the Power mode by pressing the P Key.
 11.003  DISP         the display should read:
 11.003  DISP
 11.003  DISP         P-act.= 0.0W
 11.004  HEAD         POWER FACTOR: {100W Range (1A 100V)}
 11.005  DISP         Connect the 5500A to the UUT as follows:
 11.005  DISP         [32] 5500A NORMAL HI to UUT U* (+) Input
 11.005  DISP         [32] 5500A NORMAL LO to UUT U (-) Input
 11.005  DISP         [32] 5500A AUX HI to UUT I* (+) Input
 11.005  DISP         [32] 5500A AUX LO to UUT I (-) Input
 11.006  M550         1A                                          SI
 11.007  5500         100V                         60H            SI    S  2W
 11.008  ACC          100W           0.0466U
 11.009  MEMI         Enter the UUT Power reading in Watts.
 11.010  MEME
 11.011  MEMC         W              0.4U
 12.001  M550         1A             -90deg                       SI
 12.002  5500         100V                         60H            SI    S  2W
 12.003  ACC          0.0W           0.2661U
 12.004  MEMI         Enter the UUT Power reading in Watts.
 12.005  MEME
 12.006  MEMC         W              0.4U
 13.001  END